4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

continuing problem

Thread Tools
 
Search this Thread
 
Old 03-06-2007, 12:03 AM
  #1  
Eduardo
3rd Gear Member
Thread Starter
 
Eduardo's Avatar
 
Join Date: Jan 2007
Location: Orange County
Posts: 686
Default continuing problem

Ok this is a follow up on my problem. I've had some help with my vibration in the engine which rattles the whole car, which people have told me is a missfire but no check engine light is on. I checked all the spark plugs except for the one in cylinder #5 because I can't get it out, none of my sockets can grab it, it feels like its stripped or something but its only a few months old so it can't be stripped. Also I've changed my spark wires, no luck. Some people say it could be a bad damper or can the vibration be from loose mounts(engine or tranny)? I'm running out of ideas of what it could be.
Eduardo is offline  
Old 03-06-2007, 02:08 AM
  #2  
Eduardo
3rd Gear Member
Thread Starter
 
Eduardo's Avatar
 
Join Date: Jan 2007
Location: Orange County
Posts: 686
Default RE: continuing problem

bump
Eduardo is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jma2
2005-2014 Mustangs
8
07-10-2023 01:00 AM
Big Al's 03
Mach 1 Section
4
09-21-2015 07:59 AM
ccdguy
5.0L (1979-1995) Mustang
1
09-19-2015 05:20 PM
2015Ecoboost
New Member Area
3
09-17-2015 01:48 PM
tj@steeda
Steeda Autosports
0
09-08-2015 11:50 AM



Quick Reply: continuing problem



All times are GMT -5. The time now is 05:18 PM.