wildo

What's the easiest way to tap a fuel supply for a wet fogger nitrous? I'd like to keep the schrader valve, and can't find a Tee anywhere in 1/16 npt. Could also place a Tee in where the fuel supply comes to the engine, but I don't know how the fittings work, or how I'd insert a Tee with the same type fittings, asrecommendations I read are not to use hose clamps with EFI.

I bought a nitrous setup cheapthat was used to inject direct in ports on a VW, and am changing it over to a fogger on a police crown vic, so I don't have a kit made specifically for a 4.6.

Anyone have any experience and suggestions here?