*UPDATE*Trying to install H pipe AAAGAIN!!!*UPDATE*
03-30-2007, 06:12 PM
#11
4th Gear Member
Thread Starter
Join Date: Jul 2006
Location:
Posts: 1,399
RE: Trying to install H pipe AAAGAIN!!!
OMG!!! I got all but one bolt of on the manifold. It was actually a 3/4 socket???????[
] I was trying to get the last one (inside bolt on the pass. side. I forgot to unplug the battery and it sparked on me and scared the **** out of me. the wrench is still sitting up in there. I disconnected so it won't spark again will it??? I hate electricity!!!!
Any tricks on how to get to the last bolt?? the O2 sensor is in the way and I can't get my 7/8 open socket in there to take it out.
] I was trying to get the last one (inside bolt on the pass. side. I forgot to unplug the battery and it sparked on me and scared the **** out of me. the wrench is still sitting up in there. I disconnected so it won't spark again will it??? I hate electricity!!!! Any tricks on how to get to the last bolt?? the O2 sensor is in the way and I can't get my 7/8 open socket in there to take it out.
03-30-2007, 10:58 PM
#12
4th Gear Member
Thread Starter
Join Date: Jul 2006
Location:
Posts: 1,399
RE: Trying to install H pipe AAAGAIN!!!
okay now that I am back from eating out I have the H pipe completely off but the two studs stayed on the passenger side manifold. Is there an easy way to get these out or if I don't want to deal with it can't I just use those to bolt up my new H pipe??
03-30-2007, 11:12 PM
#13
4th Gear Member
Thread Starter
Join Date: Jul 2006
Location:
Posts: 1,399
RE: Trying to install H pipe AAAGAIN!!!
also how do I put the new studs in?? I will screw into the manifold but then become flush at the top and no room for the nut to screw on. I wish this thing had instructions. Sorry I had to ask all of you how to put on an h pipe but this is a PIA.
Thread
Thread Starter
Forum
Replies
Last Post
