How to check for 31 spine axles? I bought GT with 4.10's
#1
How to check for 31 spine axles? I bought GT with 4.10's
Like stated above is there any way to know what axles I have installed without removing everything and counting the splines? or looking at the carrier in some way or form? I know i have 4.10's installed because I spun the whell around a few times. Retuned it for the 4.10's but don't know if he might of upgraded something else in the rear. Thanks Frank
#5
RE: How to check for 31 spine axles? I bought GT with 4.10's
ORIGINAL: kraze_e
put some slicks on it and do a couple 5k dumps
if it breaks..then well u didnt hahaha
put some slicks on it and do a couple 5k dumps
if it breaks..then well u didnt hahaha
Thats one way to tell for sure
#6
RE: How to check for 31 spine axles? I bought GT with 4.10's
Yeah thanks wish I could I actually got some 26x10.5x15's with some welds sitting around from a buddies fox. I'll go blow my rear end out saturday night at moroso mustang callange! no but there's no other way? and it's on the Edge that's why it's posted in here. sorry
#7
RE: How to check for 31 spine axles? I bought GT with 4.10's
More than likely the 28 splines, I dont know why everyone is so worried about hurting thier rearend, the 8.8s are burly enough from the factory and can take alot of abuse.Id be crapping myself though if I had a T/A or Camaro haha 10 bolts suck.
Thread
Thread Starter
Forum
Replies
Last Post
Figure8allday
4.6L (1996-2004 Modular) Mustang
6
08-22-2015 11:11 AM