Throwout Bearing OR Pilot Bearing

Reply Subscribe

Thread Tools

Search this Thread

06-13-2007, 02:30 AM

Ryan86272

5th Gear Member

Thread Starter

Join Date: Aug 2006

Location: same as you.

Posts: 3,287

Throwout Bearing OR Pilot Bearing

Hey Guys, im not sure what my Problem is. Before i did my Clutch(Centerforce Dual Friction) My TOB was Bad. It would Squeal a little bit, But when i Pushed the Clutch in it would stop..... NOW it Squeals LIKE CRAZY!!! ONLY when i push the Clutch in. And it gets louder as the RPM's Rise? this is the Opposite of what happened last time. Soo What do i need to buy to NEVER have this problem again?

Thanx

Ryan

06-13-2007, 02:49 AM

LetThePoniesRunFree

3rd Gear Member

Join Date: Nov 2006

Location:

Posts: 641

RE: Throwout Bearing OR Pilot Bearing

Quote:

ORIGINAL: Ryan86272

Hey Guys, im not sure what my Problem is. Before i did my Clutch(Centerforce Dual Friction) My TOB was Bad. It would Squeal a little bit, But when i Pushed the Clutch in it would stop..... NOW it Squeals LIKE CRAZY!!! ONLY when i push the Clutch in. And it gets louder as the RPM's Rise? this is the Opposite of what happened last time. Soo What do i need to buy to NEVER have this problem again?

Thanx

Ryan

If a pilot bearing is making a noise it will always make the noise regardless of the clutch being engaged or disengaged as the load on the bearing itself does not change relative to the clutch.

Squealing with the clutch engaged is either the clutch release bearing or an improperly adjusted clutch.