4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Fuel pressure gauge install

Thread Tools
 
Search this Thread
 
Old 01-19-2008, 02:41 PM
  #1  
oxfordgt
6th Gear Member
Thread Starter
 
oxfordgt's Avatar
 
Join Date: May 2006
Location: Ohio
Posts: 6,448
Default Fuel pressure gauge install

What do I need to install an electric fuel pressure gauge to my 04 gt? There is no shrader valve. And where can I buy what I need?
oxfordgt is offline  
Old 01-19-2008, 03:39 PM
  #2  
ZW99GT
6th Gear Member
 
ZW99GT's Avatar
 
Join Date: Nov 2004
Location: Tennessee
Posts: 7,797
Default RE: Fuel pressure gauge install

You could go get a passenger side fuel rail from a 99-0X car that has a shrader valve? I have no earthly idea otherwise.
ZW99GT is offline  
Old 01-19-2008, 03:42 PM
  #3  
lizzyfan
Underboss
 
lizzyfan's Avatar
 
Join Date: Jan 2006
Location: Helaware
Posts: 20,273
Default RE: Fuel pressure gauge install

My bud with an 04 had the same problem. After 03 no shrader valve!

Or this: http://www.nitrousexpress.com/Pages/FuelRailAdapt.htm
lizzyfan is offline  
Old 01-19-2008, 04:34 PM
  #4  
oxfordgt
6th Gear Member
Thread Starter
 
oxfordgt's Avatar
 
Join Date: May 2006
Location: Ohio
Posts: 6,448
Default RE: Fuel pressure gauge install

Yeah I know about the NX block but I was hoping there was another way. 1. I never plan on using cheater spray so I dont want something that says it on it. 2. I want something alittle better looking. Does any other company make these blocks?
oxfordgt is offline  
Old 01-19-2008, 05:36 PM
  #5  
lizzyfan
Underboss
 
lizzyfan's Avatar
 
Join Date: Jan 2006
Location: Helaware
Posts: 20,273
Default RE: Fuel pressure gauge install

ORIGINAL: oxfordgt

2. I want something alittle better looking. Does any other company make these blocks?
I don't think so
lizzyfan is offline  
Old 01-19-2008, 05:41 PM
  #6  
oxfordgt
6th Gear Member
Thread Starter
 
oxfordgt's Avatar
 
Join Date: May 2006
Location: Ohio
Posts: 6,448
Default RE: Fuel pressure gauge install

Nevermind I found what I was looking for. Metco motorsports makes a very nice looking one.
oxfordgt is offline  
Old 01-19-2008, 05:53 PM
  #7  
lizzyfan
Underboss
 
lizzyfan's Avatar
 
Join Date: Jan 2006
Location: Helaware
Posts: 20,273
Default RE: Fuel pressure gauge install

ORIGINAL: oxfordgt

Nevermind I found what I was looking for. Metco motorsports makes a very nice looking one.
Link?
lizzyfan is offline  
Old 01-19-2008, 09:40 PM
  #8  
racer02GTstang
5th Gear Member
 
racer02GTstang's Avatar
 
Join Date: Mar 2005
Location: Nashville/Knoxville, Tennessee
Posts: 4,687
Default RE: Fuel pressure gauge install

i have a set of stock fuel rails with a shrader valve sittin around the garage. even have the fitting that is needed to put the sensor on them.
racer02GTstang is offline  
Old 01-20-2008, 07:37 AM
  #9  
oxfordgt
6th Gear Member
Thread Starter
 
oxfordgt's Avatar
 
Join Date: May 2006
Location: Ohio
Posts: 6,448
Default RE: Fuel pressure gauge install

http://cgi.ebay.com/ebaymotors/ws/eB...47113&rd=1

I really don't want rails with the shrader valve. This is what I wanted because its on the drivers side and will make for a much cleaner install. I also wont be using stock rails. This is the one I was looking for that has nothing writen on it.
oxfordgt is offline  
Old 01-20-2008, 11:44 AM
  #10  
lizzyfan
Underboss
 
lizzyfan's Avatar
 
Join Date: Jan 2006
Location: Helaware
Posts: 20,273
Default RE: Fuel pressure gauge install

ORIGINAL: oxfordgt

http://cgi.ebay.com/ebaymotors/ws/eB...47113&rd=1

IThis is the one I was looking for that has nothing writen on it.
Looks like a nice piece, hit it up with some Mothers billett polish.
lizzyfan is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
67LimeCoupe
5.0L General Discussion
45
11-25-2015 08:55 PM
yurizx6r
5.0L (1979-1995) Mustang
49
09-07-2015 06:40 PM
Scottyboy187
SVT Forums
3
09-02-2015 10:12 AM
timeformiller44
4.6L (1996-2004 Modular) Mustang
4
08-26-2015 12:03 PM
yurizx6r
5.0L (1979-1995) Mustang
14
08-11-2015 07:50 AM



Quick Reply: Fuel pressure gauge install



All times are GMT -5. The time now is 11:43 PM.