Just dynoed my car with 100 shot
#31
RE: Just dynoed my car with 100 shot
ORIGINAL: JayC
True , I'm a track only guy but I've been @ this power level 3 years now with probably 100 track passes on the juice. With 98K on this motor I'd still hate to see her go[8D]
ORIGINAL: sstang
^^^ He's only spraying at the track, so his motor doesn't see that much stress most of the time. I'm sure he doesn't mind if the motor does let go though!
^^^ He's only spraying at the track, so his motor doesn't see that much stress most of the time. I'm sure he doesn't mind if the motor does let go though!
#32
RE: Just dynoed my car with 100 shot
ORIGINAL: Quick Shot xMLx
Wow that's impressive. You have any timeslips lol?
ORIGINAL: JayC
True , I'm a track only guy but I've been @ this power level 3 years now with probably 100 track passes on the juice. With 98K on this motor I'd still hate to see her go[8D]
ORIGINAL: sstang
^^^ He's only spraying at the track, so his motor doesn't see that much stress most of the time. I'm sure he doesn't mind if the motor does let go though!
^^^ He's only spraying at the track, so his motor doesn't see that much stress most of the time. I'm sure he doesn't mind if the motor does let go though!
#33
RE: Just dynoed my car with 100 shot
ORIGINAL: 01GT4.6
11.5's stock longblock
ORIGINAL: Quick Shot xMLx
Wow that's impressive. You have any timeslips lol?
ORIGINAL: JayC
True , I'm a track only guy but I've been @ this power level 3 years now with probably 100 track passes on the juice. With 98K on this motor I'd still hate to see her go[8D]
ORIGINAL: sstang
^^^ He's only spraying at the track, so his motor doesn't see that much stress most of the time. I'm sure he doesn't mind if the motor does let go though!
^^^ He's only spraying at the track, so his motor doesn't see that much stress most of the time. I'm sure he doesn't mind if the motor does let go though!
#34
RE: Just dynoed my car with 100 shot
ORIGINAL: Quick Shot xMLx
What kind of 60'? You his BF or something jk lol
ORIGINAL: 01GT4.6
11.5's stock longblock
ORIGINAL: Quick Shot xMLx
Wow that's impressive. You have any timeslips lol?
ORIGINAL: JayC
True , I'm a track only guy but I've been @ this power level 3 years now with probably 100 track passes on the juice. With 98K on this motor I'd still hate to see her go[8D]
ORIGINAL: sstang
^^^ He's only spraying at the track, so his motor doesn't see that much stress most of the time. I'm sure he doesn't mind if the motor does let go though!
^^^ He's only spraying at the track, so his motor doesn't see that much stress most of the time. I'm sure he doesn't mind if the motor does let go though!
#35
RE: Just dynoed my car with 100 shot
ORIGINAL: 01GT4.6
I was trying to be subtle but obviously you don't know anything about the subject at hand. His car made 220 rwhp NA, he's spraying a 100 shot and you claim 460-485hp is possible??? As for turning on the nitrous at 4500, that's pointless,these cars have the torque fall off hard around that point, even on nitrous the tq #'s will be way down in the 5500-5800 rpm range. But then again what do i know about modulars are nitrous for that matter...
Your claims are not "optimistic", they are impossible.
ORIGINAL: ottos
Just saying he should do the nitrous shot at a higher RPM for more power.
http://www.go-fast.org/z28/photos/nitrous/n2odyno.gif
IfQuicKShotturned onNOS atsay 4500 rpm andcould make440 lb-ft at 5800 or 5500 rpm, then he'd have 460 - 485 hp. Since 440lb-ft * 5500rpm / 5252= 460hp
Probably an optimistic number but its possible if the shortblock holds... alright, imdone being a smartass.
ORIGINAL: 01GT4.6
that comment was a joke right?
ORIGINAL: ottos
Once you do, and the engine makes 440 lb-ft @ 5800 rpm, then you should have 485 hp. Or so.
Once you do, and the engine makes 440 lb-ft @ 5800 rpm, then you should have 485 hp. Or so.
Just saying he should do the nitrous shot at a higher RPM for more power.
http://www.go-fast.org/z28/photos/nitrous/n2odyno.gif
IfQuicKShotturned onNOS atsay 4500 rpm andcould make440 lb-ft at 5800 or 5500 rpm, then he'd have 460 - 485 hp. Since 440lb-ft * 5500rpm / 5252= 460hp
Probably an optimistic number but its possible if the shortblock holds... alright, imdone being a smartass.
Your claims are not "optimistic", they are impossible.
Sorry that was pretty arrogant of me. Apologize. I do admit i am completely utterly wrong.
#36
RE: Just dynoed my car with 100 shot
ORIGINAL: ottos
Sorry that was pretty arrogant of me. Apologize. I do admit i am completely utterly wrong.
ORIGINAL: 01GT4.6
I was trying to be subtle but obviously you don't know anything about the subject at hand. His car made 220 rwhp NA, he's spraying a 100 shot and you claim 460-485hp is possible??? As for turning on the nitrous at 4500, that's pointless,these cars have the torque fall off hard around that point, even on nitrous the tq #'s will be way down in the 5500-5800 rpm range. But then again what do i know about modulars are nitrous for that matter...
Your claims are not "optimistic", they are impossible.
ORIGINAL: ottos
Just saying he should do the nitrous shot at a higher RPM for more power.
http://www.go-fast.org/z28/photos/nitrous/n2odyno.gif
IfQuicKShotturned onNOS atsay 4500 rpm andcould make440 lb-ft at 5800 or 5500 rpm, then he'd have 460 - 485 hp. Since 440lb-ft * 5500rpm / 5252= 460hp
Probably an optimistic number but its possible if the shortblock holds... alright, imdone being a smartass.
ORIGINAL: 01GT4.6
that comment was a joke right?
ORIGINAL: ottos
Once you do, and the engine makes 440 lb-ft @ 5800 rpm, then you should have 485 hp. Or so.
Once you do, and the engine makes 440 lb-ft @ 5800 rpm, then you should have 485 hp. Or so.
Just saying he should do the nitrous shot at a higher RPM for more power.
http://www.go-fast.org/z28/photos/nitrous/n2odyno.gif
IfQuicKShotturned onNOS atsay 4500 rpm andcould make440 lb-ft at 5800 or 5500 rpm, then he'd have 460 - 485 hp. Since 440lb-ft * 5500rpm / 5252= 460hp
Probably an optimistic number but its possible if the shortblock holds... alright, imdone being a smartass.
Your claims are not "optimistic", they are impossible.
Sorry that was pretty arrogant of me. Apologize. I do admit i am completely utterly wrong.
#38
RE: Just dynoed my car with 100 shot
ORIGINAL: JayC
A 1.56 60'. No BF....my wife takes good care of me
ORIGINAL: Quick Shot xMLx
What kind of 60'? You his BF or something jk lol
ORIGINAL: 01GT4.6
11.5's stock longblock
ORIGINAL: Quick Shot xMLx
Wow that's impressive. You have any timeslips lol?
ORIGINAL: JayC
True , I'm a track only guy but I've been @ this power level 3 years now with probably 100 track passes on the juice. With 98K on this motor I'd still hate to see her go[8D]
ORIGINAL: sstang
^^^ He's only spraying at the track, so his motor doesn't see that much stress most of the time. I'm sure he doesn't mind if the motor does let go though!
^^^ He's only spraying at the track, so his motor doesn't see that much stress most of the time. I'm sure he doesn't mind if the motor does let go though!
550 FT/Lbs... man that is alot of TQ Makes me want to put a shot on from 3000 to 4500 RPM
#39
RE: Just dynoed my car with 100 shot
ORIGINAL: 2000GT4.6
I have forgotten... is there any weight reduction.
550 FT/Lbs... man that is alot of TQ Makes me want to put a shot on from 3000 to 4500 RPM
ORIGINAL: JayC
A 1.56 60'. No BF....my wife takes good care of me
ORIGINAL: Quick Shot xMLx
What kind of 60'? You his BF or something jk lol
ORIGINAL: 01GT4.6
11.5's stock longblock
ORIGINAL: Quick Shot xMLx
Wow that's impressive. You have any timeslips lol?
ORIGINAL: JayC
True , I'm a track only guy but I've been @ this power level 3 years now with probably 100 track passes on the juice. With 98K on this motor I'd still hate to see her go[8D]
ORIGINAL: sstang
^^^ He's only spraying at the track, so his motor doesn't see that much stress most of the time. I'm sure he doesn't mind if the motor does let go though!
^^^ He's only spraying at the track, so his motor doesn't see that much stress most of the time. I'm sure he doesn't mind if the motor does let go though!
550 FT/Lbs... man that is alot of TQ Makes me want to put a shot on from 3000 to 4500 RPM
Thread
Thread Starter
Forum
Replies
Last Post
92 5.0stang
5.0L (1979-1995) Mustang
4
08-13-2015 06:46 AM
Milan Dragway
Members Rides and Car Show Section
0
08-12-2015 03:43 PM