What should i run
#1
What should i run
I have a 2001 Mustang Gt With an Auto and was wondering if you all could tell me what i should be running in the quarter. it has the following:
Magnapacks cat back, Magnaflow x-pipe with cats, C&L True flow intake with a 90mm mass air meter,70mm throtlle body and bored out plenum, Nitto 315/35/R17 Drag Radials, and a diablo predator with the stock tune. What should i be running in the quarter and what else should i do to achieve a 12's. any help would be very helpful.
Magnapacks cat back, Magnaflow x-pipe with cats, C&L True flow intake with a 90mm mass air meter,70mm throtlle body and bored out plenum, Nitto 315/35/R17 Drag Radials, and a diablo predator with the stock tune. What should i be running in the quarter and what else should i do to achieve a 12's. any help would be very helpful.
#5
RE: What should i run
I Dont want to go with NOS and i was really thinking about the 4.10 gears. what without going with a supercharger or NOS can i do to get it in the 12's. do you think having it dyno tuned with the Predator will bring down the time any. i have a little money to spend but would like to get a NA car as fast as i can then go with a turbo or supercharger. thanks
#7
RE: What should i run
Now on the Heads should i get the patriot heads or should i just get mine on my car ported. if i get mine ported is their anyone who knows a good place in the Kansas City area to take them to.
#10
RE: What should i run
I would def. get a trans cooler and a shift kit for your car! Also if you want to you can get a stall convertor, all of this will help you run constiantly, and make it a lot more fun to drive on the street!!! You can also get undrive pullys, gears, and I would have it dyno tuned with your predator also. After these mods take it back to the track and see what it runs, and go form there as to what to get next. Most likely you will need to get cams and head work done.
I will be installing my shift kit, trans cooler, and pr0-chamber in the next week or so, then am going to have the car dyno tuned I will post my #'s whnd I get them.
I will be installing my shift kit, trans cooler, and pr0-chamber in the next week or so, then am going to have the car dyno tuned I will post my #'s whnd I get them.