Removing factory Emblems and Spoiler Help!
06-20-2008, 07:03 PM
#11
5th Gear Member
Join Date: Aug 2007
Location: PA
Posts: 2,243
RE: Removing factory Emblems and Spoiler Help!
ORIGINAL: 1970coupe
if i take off the ford logo and the gt emblems will it leave any factory holes? just do the old dental floss and credit card trick to remove them?
if i take off the ford logo and the gt emblems will it leave any factory holes? just do the old dental floss and credit card trick to remove them?
On the trunk lid the GT will have no holes, but the Ford badge will, on the fenders all will have holes.
Lynn
06-20-2008, 10:09 PM
#12
3rd Gear Member
Thread Starter
Join Date: Aug 2007
Location:
Posts: 755
RE: Removing factory Emblems and Spoiler Help!
i dont think im going to be doing the cobra emblems. it would just be wrong. ill probably just put some caps in the holes or somethin that looks clean.
thanks guys!
thanks guys!
06-21-2008, 08:35 AM
#13
3rd Gear Member
Join Date: Apr 2007
Location: ATL
Posts: 881
RE: Removing factory Emblems and Spoiler Help!
I could be wrong, but I think that I read on another thread somewhere that the cobra spoiler will not cover the holes left from your stock GT spoiler. If that is the case, then there will be significant cost in filling and repainting those holes. Just a warning....
06-21-2008, 01:18 PM
#14
4th Gear Member
Join Date: Jan 2008
Location: yuma, az
Posts: 1,252
RE: Removing factory Emblems and Spoiler Help!
also it depends on what spoiler your stang came with. there are 2 different spoilers used for the 99-04 gt stangs. earlier ones have a wrap around spoiler and the later ones use a flat raised spoiler.
06-21-2008, 03:09 PM
#15
5th Gear Member
Join Date: May 2007
Location: Smyrna, TN
Posts: 4,524
RE: Removing factory Emblems and Spoiler Help!
doesnt matter what year spoiler you have the cobra wing will not cover the exsisting holes. you will need a wingless trunk or have the holes filled and painted
06-21-2008, 06:51 PM
#16
1st Gear Member
Join Date: Dec 2007
Location: Washington
Posts: 112
RE: Removing factory Emblems and Spoiler Help!
I removed my GT emblems with fishing line, heating them up would have probably been a good idea, but it didnt come to mind. Cobra emblems would be a bad idea, but AM.com makes the 4.6HO emblems modeled after the older stangs emblems that I find sekzy. to each his own, its your car, but to put emblems from a performance version on something that is not, is an insult to everyone who does own a gt. Yea the snake looks cool, but if other peoples opinions are really what makes you drive that car, maybe mustangs and these forums arent for u. I hear honda makes some "trick" rides?
06-21-2008, 07:01 PM
#17
6th Gear Member
Join Date: May 2006
Location: Ohio
Posts: 6,448
RE: Removing factory Emblems and Spoiler Help!
ORIGINAL: ezking
I removed my GT emblems with fishing line, heating them up would have probably been a good idea, but it didnt come to mind. Cobra emblems would be a bad idea, but AM.com makes the 4.6HO emblems modeled after the older stangs emblems that I find sekzy. to each his own, its your car, but to put emblems from a performance version on something that is not, is an insult to everyone who does own a gt. Yea the snake looks cool, but if other peoples opinions are really what makes you drive that car, maybe mustangs and these forums arent for u. I hear honda makes some "trick" rides?
I removed my GT emblems with fishing line, heating them up would have probably been a good idea, but it didnt come to mind. Cobra emblems would be a bad idea, but AM.com makes the 4.6HO emblems modeled after the older stangs emblems that I find sekzy. to each his own, its your car, but to put emblems from a performance version on something that is not, is an insult to everyone who does own a gt. Yea the snake looks cool, but if other peoples opinions are really what makes you drive that car, maybe mustangs and these forums arent for u. I hear honda makes some "trick" rides?
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
