4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Please - HELP! (Exahust Issues)

Thread Tools
 
Search this Thread
 
Old Jun 30, 2008 | 11:27 AM
  #1  
Warrior62's Avatar
Warrior62
Thread Starter
1st Gear Member
 
Joined: Oct 2007
Posts: 115
From:
Default Please - HELP! (Exahust Issues)

Ok guys my brother just got a 02 Mustang GT like mine for a great deal. The only catch is he has some minimal repairs that need to be done. He has two broken studs on the exhaust manifold and a o/r x is barely hangning on there. No one will touch itwithout the cats, as far as i know, but we do have the stock h-pipe assembly in our possesion. What should be done? Thinking about going straight to l/t headers, but where shouldwe look into getting this done? A normal exhaust shop won't do it, right? Either way, a custom exhaust is needed. Who could do this, or even better, any places recommened in Ohio?
Thanks, any help reallyappreciated.
Old Jun 30, 2008 | 11:30 AM
  #2  
mustangcat's Avatar
mustangcat
Deputy CatDog - To Purr'tect and Explode
 
Joined: Jun 2007
Posts: 1,900
From: NM
Default RE: Please - HELP! (Exahust Issues)

I don't see why a normal Exhaust shop won't do it. Check around and find out. If it turns out they won't work on it, find a friend or 'Back Yard' shop that you trust and have them do the work for you.
Old Jun 30, 2008 | 11:44 AM
  #3  
black35th's Avatar
black35th
4th Gear Member
 
Joined: Jun 2007
Posts: 1,996
From: Ohio
Default RE: Please - HELP! (Exahust Issues)

You can just replace those studs, it is a PITA but its possible.

Where are you in Ohio? I might be able to point you in the right direction.
Old Jun 30, 2008 | 01:57 PM
  #4  
Warrior62's Avatar
Warrior62
Thread Starter
1st Gear Member
 
Joined: Oct 2007
Posts: 115
From:
Default RE: Please - HELP! (Exahust Issues)

I'm in delaware county (lewis center). Closer to Columbus. I knowwe could replace those, but this is a great excuse for some long tube headers! Any ideas? Thanks guys.
Old Jun 30, 2008 | 02:54 PM
  #5  
bb816331's Avatar
bb816331
I ♥ Acer
 
Joined: Jun 2008
Posts: 232
From:
Default RE: Please - HELP! (Exahust Issues)

My local exhaust shop said they wouldn't touch my car w/o cats b/c they are getting cracked down on for emissions reasons. They said if you get caught w/o them they will trace who did the work and can fine them up to like $20k. idk my $.02
Old Jun 30, 2008 | 02:59 PM
  #6  
Warrior62's Avatar
Warrior62
Thread Starter
1st Gear Member
 
Joined: Oct 2007
Posts: 115
From:
Default RE: Please - HELP! (Exahust Issues)

I know, it sucks! why can't we pollute while we still have gas to pollute with! lol, my .02 also! maybe they will be legally allowed to work on it as long as its replaced with cats.
any experience with this?
Old Jun 30, 2008 | 03:59 PM
  #7  
marseea1's Avatar
marseea1
1st Gear Member
 
Joined: Aug 2007
Posts: 74
From:
Default RE: Please - HELP! (Exahust Issues)

There is a modular depot right here in newport ky right by cincinnati ohio. they will work on it. dont know if you can travel that far but its an option
Old Jun 30, 2008 | 04:16 PM
  #8  
bb816331's Avatar
bb816331
I ♥ Acer
 
Joined: Jun 2008
Posts: 232
From:
Default RE: Please - HELP! (Exahust Issues)

ORIGINAL: Warrior62

I know, it sucks! why can't we pollute while we still have gas to pollute with! lol, my .02 also! maybe they will be legally allowed to work on it as long as its replaced with cats.
any experience with this?
They told me if the vehicle is not equipped with cats, you may purchase them and they will install them. They said they will not be allowed to do any work other than add cats until that is taken care of. Or, do what I do: Go to the blvd and tell one of the barrio exhaust shop techs you'll pay labor and throw in a 12 pack of Budweiser and they usually do it [:-]
Old Jun 30, 2008 | 07:26 PM
  #9  
Warrior62's Avatar
Warrior62
Thread Starter
1st Gear Member
 
Joined: Oct 2007
Posts: 115
From:
Default RE: Please - HELP! (Exahust Issues)

thank you all for the help,little bro's considering everything.
Anyone else have something to add?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cr620
V6 (1994-2004) Mustangs
2
Oct 3, 2022 10:18 PM
lincolnshibuya
V6 (1994-2004) Mustangs
9
Dec 8, 2015 04:37 PM
Thunderball
4.6L (1996-2004 Modular) Mustang
15
Nov 22, 2015 11:49 PM
chrisdbassplayer
2010-current S197 Appearance Section
4
Oct 13, 2015 06:53 PM
Bokeo
Street/Strip
6
Oct 10, 2015 08:28 PM




All times are GMT -5. The time now is 03:45 PM.