4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

f150 5.4 in my 97 mustang help

Thread Tools
 
Search this Thread
 
Old 12-31-2008, 08:41 AM
  #21  
bubba823
Thread Starter
 
bubba823's Avatar
 
Join Date: Oct 2008
Location: oklahoma
Posts: 31
Default

What would cause motor to surge in rpm's on its own? goes from 500 then shoots to 2000 then right back down and when it is first started ussually dies several times on the down side of rpm's when motor is very cold(also very cold outside) then once it warms up it will still surge but only about 500 rpms. right now it is idaling at 500 to 750 rpm's, i still got to get that adjusted out but can't until I can get it to run write with the jump/drop in rpm's. also when barly throttled during driving it will surge forward so I keep one foot ready to break at all times.runs smooth when throttled hard so I just keep it to the floor....LOL.

I checked for vaccuum leaks all around intake and lines. found none.

Last edited by bubba823; 12-31-2008 at 09:13 AM.
bubba823 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NorthAmericanTuning
Vendor For Sale / Group Buy Classifieds
5
11-09-2016 11:45 AM
NorthAmericanTuning
S550 2015-2023 Mustang
3
03-18-2016 11:21 AM
PearlGenPu
V6 (1994-2004) Mustangs
6
08-12-2015 01:57 PM
StangMuscle
Motor Swap Section
0
08-12-2015 07:27 AM
daytooday
Motor Swap Section
2
08-11-2015 09:22 AM



Quick Reply: f150 5.4 in my 97 mustang help



All times are GMT -5. The time now is 02:29 AM.