cezr75

hi everyone
i recently replaced a faulty iac on my bullit. it ran fine for a couple of weeks but now it idles at around 900rpms as opposed to the normal 750rpms. i also replaced the tps i disconnected the battery cables over night to reset the computer i checked for vacumm leaks and i cleaned the throttle body. still idling high. any suggestions would be greatly appreciated. thanks guys

torchstang02

are you letting the engine warm up or just going by wat it says right when you start it up?

cezr75

hey torchstang
well im letting her warm up thoroughly and even after ive driven for a long time it still idles to high