help with wiring for msd window switch!!!
#1
help with wiring for msd window switch!!!
ok guys so i just purchased a MSD window switch pn 8956. its the one you use the pills for. so right now i have my nitrous all wired up and it sprays with the wot switch. i want to wire up this msd window switch as well for safety measures. question is i have looked up and researched which wires go where but yet i dont know where i would hook them up on my already wired system.
im guessing the red wire goes to the switch 12 v source and ill tap into the line my wot switch goes to,
black connects to a ground. i guess ill connect it to any good ground on the chasssis
yellow connects to the ground on the device i plan to activate.. so do i connect this to my wot switch negative side or to the nitrous solenoid or what????
white goes to the rpm input wire. yet i have two coil packs and spark plugs everywhere. which wire would i tap into for a rpm signal wire for the switch?
my car is a 98 gt with the full pi swap. thanks alot guys hope yall can help
im guessing the red wire goes to the switch 12 v source and ill tap into the line my wot switch goes to,
black connects to a ground. i guess ill connect it to any good ground on the chasssis
yellow connects to the ground on the device i plan to activate.. so do i connect this to my wot switch negative side or to the nitrous solenoid or what????
white goes to the rpm input wire. yet i have two coil packs and spark plugs everywhere. which wire would i tap into for a rpm signal wire for the switch?
my car is a 98 gt with the full pi swap. thanks alot guys hope yall can help
#2
Thread
Thread Starter
Forum
Replies
Last Post
DreadPirateRoberts
V6 (1994-2004) Mustangs
4
09-26-2015 02:11 PM