4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Help need oil pan

Thread Tools
 
Search this Thread
 
Old 08-10-2011, 05:13 AM
  #1  
collin_nicholas
Thread Starter
 
collin_nicholas's Avatar
 
Join Date: Jul 2011
Location: Nebraska
Posts: 4
Default Help need oil pan

I have a 96 mustang GT with the 4.6l v8 my oil pan is rusting out and leaking really need a new one but nobody has one. i don't want a performance one. I saw a few online for like 40-50 bucks but couldn't order any help would be highly appreciated.
collin_nicholas is offline  
Old 08-10-2011, 05:19 AM
  #2  
Blackvenom01
4th Gear Member
 
Blackvenom01's Avatar
 
Join Date: Jan 2008
Location: gahanna ohio
Posts: 1,394
Default

oem from ford!!
Blackvenom01 is offline  
Old 08-10-2011, 05:22 AM
  #3  
FlamingoGT
2nd Gear Member
 
FlamingoGT's Avatar
 
Join Date: Sep 2009
Location: Jax FL
Posts: 442
Default

Why couldn't you order online?
What about a salvage yard?
What part of Nebraska? There are a couple people on here from Lincoln that I know of, and I used to live in Omaha... one of us might be able to point you to a place.
FlamingoGT is offline  
Old 08-11-2011, 02:08 AM
  #4  
collin_nicholas
Thread Starter
 
collin_nicholas's Avatar
 
Join Date: Jul 2011
Location: Nebraska
Posts: 4
Default

talked to ford dealer they couldn't get one, the online store doesn't sell them anymore. went to a salvage yard they punch holes in them to drain the oil so all the ones they had were worthless
collin_nicholas is offline  
Old 08-11-2011, 02:09 AM
  #5  
collin_nicholas
Thread Starter
 
collin_nicholas's Avatar
 
Join Date: Jul 2011
Location: Nebraska
Posts: 4
Default

im in omaha
collin_nicholas is offline  
Old 08-11-2011, 05:08 AM
  #6  
uberstang1
Chupacabra
 
uberstang1's Avatar
 
Join Date: Jul 2004
Location: wilkes-barre PA
Posts: 9,621
Default

what kind of half assed yard punches holes into oilpans to drain them when all you have to do is removed the drain plug.
uberstang1 is offline  
Old 08-11-2011, 06:35 PM
  #7  
FlamingoGT
2nd Gear Member
 
FlamingoGT's Avatar
 
Join Date: Sep 2009
Location: Jax FL
Posts: 442
Default

Originally Posted by uberstang1
what kind of half assed yard punches holes into oilpans to drain them when all you have to do is removed the drain plug.
If they don't care if they can sell the oil pan, you have to admit it would be quicker and generally easier to just punch a hole in it instead of taking the time to unscrew a bolt.

OP, have you checked the places there on 60th between Q and Harrison? Even if the U-Pull-It is one of the ones that punch the oil pans, I seem to remember a couple of auto recycler places around there too... one of them might have an oil pan.
Look up WannaBeGearhead and Boris91 ... they are both in the Lincoln area and might have an idea of where to get an oil pan also.
FlamingoGT is offline  
Old 08-12-2011, 05:09 AM
  #8  
Blackvenom01
4th Gear Member
 
Blackvenom01's Avatar
 
Join Date: Jan 2008
Location: gahanna ohio
Posts: 1,394
Default

might just have to deal with it and get an aftermarket one there is nothing bad with them prolly made better then fords OEM...just sand it down and spraypaint it black with good paint or rustoleum and you wont know the diff lol
Blackvenom01 is offline  
Old 08-13-2011, 03:39 AM
  #9  
collin_nicholas
Thread Starter
 
collin_nicholas's Avatar
 
Join Date: Jul 2011
Location: Nebraska
Posts: 4
Default

found a couple just need to order just was hoping for a little cheaper
collin_nicholas is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
b8checker
Classic Mustangs (Tech)
8
10-08-2015 12:55 PM
UrS4
S197 Handling Section
10
10-03-2015 06:23 AM
b8checker
New Member Area
3
09-30-2015 07:11 AM
wraith777
General Tech
1
09-28-2015 10:49 AM
EASTIDEE123
5.0L (1979-1995) Mustang
14
09-14-2015 03:52 PM



Quick Reply: Help need oil pan



All times are GMT -5. The time now is 12:49 PM.