piston notch q's
#1
piston notch q's
I am wondering if I will need to notch my pistons for the cams I will be running. The pistons are -23cc dish, here is the info from my cam card
Intake/Exhaust
Gross Valve Lift- .500 .500
Cam Lobe Lift- .3000 .3000
Adv, Duration @ .006 Valve Lift 269 269
Intake/ Exhaust
Duration @ .050- 234 234
Thanks
Intake/Exhaust
Gross Valve Lift- .500 .500
Cam Lobe Lift- .3000 .3000
Adv, Duration @ .006 Valve Lift 269 269
Intake/ Exhaust
Duration @ .050- 234 234
Thanks
#2
there is still a "rim" around the top of the piston where the valve will hit, so notching is necessary still no matter how much dish you run IF you are in the category that needs notching.
see here:
http://www.modularheadshop.com/FAQ/images/notches.jpg
that looks like a pretty radical cam you have there. what exactly is your application?
see here:
http://www.modularheadshop.com/FAQ/images/notches.jpg
that looks like a pretty radical cam you have there. what exactly is your application?
Thread
Thread Starter
Forum
Replies
Last Post
uberstang1
Classic Mustangs (Tech)
6
09-20-2015 06:42 PM