4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

Two tries to get into 5th gear?

Thread Tools
 
Search this Thread
 
Old 06-11-2012, 10:27 PM
  #11  
Doyon
3rd Gear Member
Thread Starter
 
Doyon's Avatar
 
Join Date: Apr 2012
Location: Alaska
Posts: 681
Default

Originally Posted by whitestangergt
id have to say its the syncro, i had the same problem in my 97 except it took two try's to get it out of fifth. finally it hung up in fifth one day on the highway when i was coming to a stoplight, had to force it out and after that the sync was shot. and it was rough moving the shifter through the entire gear range after that.
How much was it to replace? Shop cost or just the syncro itself.

I'll probably knock the dust off of my CTS and give the GT a break of DD haha.
Doyon is offline  
Old 06-12-2012, 05:40 PM
  #12  
whitestangergt
 
whitestangergt's Avatar
 
Join Date: Dec 2010
Location: South Carolina
Posts: 21
Default

a shop wanted 1200 for a full syncro rebuild (all of the gears) sadly my trans is seized to unholy he** so im just gonna find me a low mileage used one and use that. i dont have the cash for a full rebuild
whitestangergt is offline  
Old 06-13-2012, 11:53 AM
  #13  
Doyon
3rd Gear Member
Thread Starter
 
Doyon's Avatar
 
Join Date: Apr 2012
Location: Alaska
Posts: 681
Default

Can anyone point me in the right direction to find the syncro online? I assume buying it would take care of all the gears or can I just buy a certain one for 5th gear?

Thanks.
Doyon is offline  
Old 06-14-2012, 09:23 PM
  #14  
russellthelovemuscle
2nd Gear Member
 
russellthelovemuscle's Avatar
 
Join Date: Apr 2012
Location: CA
Posts: 173
Default

call up tremec, they'll have the part number if you just want syncros. if your not going to do the work yourself though, i would ride out cause you could pick up a brand new stock transmission for about $1200. so whats the point of having a shop just replace a few syncro rings when you could get a whole new tranny for the same price
russellthelovemuscle is offline  
Old 06-14-2012, 09:24 PM
  #15  
russellthelovemuscle
2nd Gear Member
 
russellthelovemuscle's Avatar
 
Join Date: Apr 2012
Location: CA
Posts: 173
Default

and i have seen tranny rebuild kits for about $500-$700 for our trannys but if you have a shop do it, new tranny might be the way to go
russellthelovemuscle is offline  
Old 06-15-2012, 04:43 PM
  #16  
Doyon
3rd Gear Member
Thread Starter
 
Doyon's Avatar
 
Join Date: Apr 2012
Location: Alaska
Posts: 681
Default

Originally Posted by russellthelovemuscle
call up tremec, they'll have the part number if you just want syncros. if your not going to do the work yourself though, i would ride out cause you could pick up a brand new stock transmission for about $1200. so whats the point of having a shop just replace a few syncro rings when you could get a whole new tranny for the same price
Interesting, I will have to look into that, Thanks.
Doyon is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Bokeo
Street/Strip
6
10-10-2015 08:28 PM
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
uedlose
The Racers Bench
4
10-01-2015 08:31 PM
tj@steeda
Florida Regional Chapter
0
09-30-2015 08:04 PM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM



Quick Reply: Two tries to get into 5th gear?



All times are GMT -5. The time now is 05:06 PM.