oxfordgt

I would like to see pics of where it hits. MMR storker kits are designed to have no clearance problems at all. Their stroker cranks are coyote cranks and stock length rods. If you have having issues I would take the block to a machine shop and have them check the mains for straightness.

Drastang

MMR just now told me there are some know clearance issues with some ford SOHC. the areas like I said already had factory work so if the stroker kit is any larger making these notches larger do make sense.

jwog666

good to hear that u got it figured out, nothing better than calling the place that makes the kit, they have seen it all

Drastang

well I got a free following crank had one issue .... I have been doing this at night and didn't have clear protective glasses and used someone's prescription glasses all I had.... dug 1/8 inch in to the block where I didn't want to and I'm a perfectionist. so pissed at myself.

WJL

Got any pictures?

Drastang

first is the factory made notch , then my good one ...

Drastang

and the one I did with classes on .....