I changed the maf and i am still getting thte same code again

 

google doesn't work well for you?

P1152
Oxygen Sensor Engine Rich *Codes* B U (bank B, upstream sensor)

It's likely that oxygen sensor might need replacement or the MIL eliminators are not functioning properly. Interchange them and see if the code changes to P1138. Then you know that the simulator is bad.

 

yep if u didnt get the bbk mils then might as well through them out cause thats probly it...

 

I was running the same code today, I installed a new Bank 2 Sensor 1 o2 sensor and it went off. Is that the only code you are showing? There is no other specific sensor code?

 

bbk mil eliminators 2 sets brand spanking new, bank 2 position 1 o2 sensor brand new, new maf sensor changed al this one item at a time still get them same code p1152, thing idles good but on the road it acts like a misfire but its not so that lead me to the maf and still the same thing

 

now the light went off for a day and then came back on this morning and now I have a lobey weird idle. I just dont know where to go from here

 

We are in the exact same boat. Have you experienced sputtering?

 

Yes when cruising around at 55 60 it acts like it is missing but its not really missing i dont think.

 

I am wondering if the injector i replaced really isnt the right one or if it is that far off with the rate flows

 

I just got off the phone with a frod motorsports rep and he said it sounds like the injector is staying open all the time and flooding out the cylinder. so Im off to check that out.