4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

P1152 engine code

Thread Tools
 
Search this Thread
 
Old Feb 9, 2006 | 09:42 PM
  #1  
beheivjer's Avatar
beheivjer
Thread Starter
2nd Gear Member
 
Joined: Mar 2005
Posts: 323
From:
Default P1152 engine code

Right now I have a check engine light that flags a 1152 code. It happened after I changed out my Cai and added a bbk xpipe. I installed mil eliminators and a new bank 2 position 1 o2 sensor. I checked the hoses and fixed the one that might have had a vaccum leak changed the egr gasket and it still is coming back on. Anybody have any other suggestions? thanks
Old Feb 10, 2006 | 02:29 PM
  #2  
beheivjer's Avatar
beheivjer
Thread Starter
2nd Gear Member
 
Joined: Mar 2005
Posts: 323
From:
Default RE: P1152 engine code

Kind of sucks if you have an actual problem you get no replys but ask about pulleys or exhaust and everybody know something

Guess im going to try a maf and see what happens the wire and heating element were a little back.
Old Feb 10, 2006 | 02:34 PM
  #3  
StickShifty's Avatar
StickShifty
5th Gear Member
 
Joined: May 2005
Posts: 4,536
From: New Jersey
Default RE: P1152 engine code

try disconnecting the battery for 20 mins. it clears the codes sometimes.
Old Feb 10, 2006 | 03:06 PM
  #4  
red2k1gt's Avatar
red2k1gt
5th Gear Member
 
Joined: Jun 2004
Posts: 2,485
From: fl
Default RE: P1152 engine code

ORIGINAL: beheivjer

Kind of sucks if you have an actual problem you get no replys but ask about pulleys or exhaust and everybody know something

Guess im going to try a maf and see what happens the wire and heating element were a little back.
Not everyone memorizes the CEL codes and can repeat them off the top of their head, also this is the middle of the day on a weekday. As stickshifty said, try disconnecting the battery and see what that does for you. Also, autozone has the machine where they can run the code and tell you exactly what it is.
Old Feb 10, 2006 | 06:40 PM
  #5  
beheivjer's Avatar
beheivjer
Thread Starter
2nd Gear Member
 
Joined: Mar 2005
Posts: 323
From:
Default RE: P1152 engine code

i have a code reader, thats not what im asking, i know how to clear codes. I wanted to know if anybody had an thoughts on why this was happening. And my original post was: P1152 engine code - 2/9/2006 7:42:35 PM
Old Feb 10, 2006 | 11:54 PM
  #6  
Davojan59's Avatar
Davojan59
4th Gear Member
 
Joined: Apr 2005
Posts: 1,093
From: California
Default RE: P1152 engine code

hey man i think what he meant was what exactly does that code mean? cause not all of us know the number off the top of our heads....if u have bad mils (ie not BBK) that could be it...also i had a case after my or xpipe...well like three months down ..and i had to replace my iac and maf. but let us know what that code means and more help will be available
Old Feb 11, 2006 | 01:58 AM
  #7  
Tac2cul's Avatar
Tac2cul
3rd Gear Member
 
Joined: Nov 2005
Posts: 784
From: Arizona
Default RE: P1152 engine code

a P1152 indicate air/fuel ratio is correcting lean for overly rich condition
Old Feb 11, 2006 | 02:09 AM
  #8  
Like778's Avatar
Like778
2nd Gear Member
 
Joined: Jan 2006
Posts: 167
From: Panama City, FL
Default RE: P1152 engine code


ORIGINAL: beheivjer

Right now I have a check engine light that flags a 1152 code. It happened after I changed out my Cai and added a bbk xpipe. I installed mil eliminators and a new bank 2 position 1 o2 sensor. I checked the hoses and fixed the one that might have had a vaccum leak changed the egr gasket and it still is coming back on. Anybody have any other suggestions? thanks
did you have any welding done with the addition of the x-pipe? if so, if the person who welded the pipe did not ground the car you might have some blown fuses. check the fuse box, it could be the cause.
Old Feb 11, 2006 | 11:52 AM
  #9  
beheivjer's Avatar
beheivjer
Thread Starter
2nd Gear Member
 
Joined: Mar 2005
Posts: 323
From:
Default RE: P1152 engine code

no welding done on the car all bolt ons the light comes on after driving for 5-6 miles after resting every time
Old Feb 11, 2006 | 12:58 PM
  #10  
red2k1gt's Avatar
red2k1gt
5th Gear Member
 
Joined: Jun 2004
Posts: 2,485
From: fl
Default RE: P1152 engine code

what brand mil's did you put on?



All times are GMT -5. The time now is 02:49 AM.