4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

upgrades?

Thread Tools
 
Search this Thread
 
Old Nov 20, 2007 | 01:44 PM
  #11  
OzzDOA's Avatar
OzzDOA
3rd Gear Member
 
Joined: Mar 2007
Posts: 821
From: Philly
Default RE: upgrades?

If you don't want to bust the bank go with gears, mid-pipe, cat-back, throttle body/intake, a 91 or 93 octane tune and maybe under-drive pullies. That will usually get you into the 250-260 rwhp range for around $2200. If you want an extra punch but don't have the cash for a blower then nitrous is the way to go and is pretty safe if done correctly.
Old Nov 20, 2007 | 01:49 PM
  #12  
MustangTitan's Avatar
MustangTitan
Thread Starter
1st Gear Member
 
Joined: Jun 2007
Posts: 72
Default RE: upgrades?

i know gt run around 260 stock but what are they pushing rwhp
Old Nov 20, 2007 | 01:54 PM
  #13  
MustangTitan's Avatar
MustangTitan
Thread Starter
1st Gear Member
 
Joined: Jun 2007
Posts: 72
Default RE: upgrades?

i am looking at getting a jlt cold air intake
Old Nov 20, 2007 | 01:58 PM
  #14  
1fstblckgt's Avatar
1fstblckgt
I ♥ Acer
 
Joined: Sep 2007
Posts: 2,346
From: Not really sure, Alabama
Default RE: upgrades?

[sm=goodidea.gif] I have the JLT RAI on my car.. I like it.
Old Nov 20, 2007 | 01:59 PM
  #15  
OzzDOA's Avatar
OzzDOA
3rd Gear Member
 
Joined: Mar 2007
Posts: 821
From: Philly
Default RE: upgrades?

Autos are usually in the 215 area and manuals get maybe 225 stock. Sometimes you get a factory freak that's 5 hp higher.
Old Nov 20, 2007 | 02:02 PM
  #16  
MustangTitan's Avatar
MustangTitan
Thread Starter
1st Gear Member
 
Joined: Jun 2007
Posts: 72
Default RE: upgrades?

whats everyones opinion on exhuast. i have flows on my v6. i want it to sound mean
Old Nov 20, 2007 | 02:18 PM
  #17  
venom3469's Avatar
venom3469
1st Gear Member
 
Joined: Nov 2007
Posts: 54
From:
Default RE: upgrades?

Yeah what I would do first is borla exhaust,K&N CAI,373 gears, that would be a good start or save up and get a procharger then do intervals then throw on n2o
Old Nov 20, 2007 | 04:11 PM
  #18  
josh.davis's Avatar
josh.davis
3rd Gear Member
 
Joined: Sep 2007
Posts: 643
From: MO
Default RE: upgrades?

[sm=goodidea.gif]
Old Dec 6, 2007 | 05:49 PM
  #19  
teej281's Avatar
teej281
4.6L Section Moderator
 
Joined: Nov 2007
Posts: 10,286
From: South Central PA
Default RE: upgrades?

First, you should do a little checking on your drivetrain and make sure you clutch, flywheel, u-joints, etc need some attention because you dont want to get into making much power to find you wasted your clutch or whatever and dont have $$$ to fix it. Then do exhaust and intake and get an Xcal 3 handheld and see if thats close to what you want. Then if thats still not enough, go with a nice stage 2 cam that will give you a little lope butstill remain driveableand maybe a nice little shot of "go juice". And if this isnt your daily driver, then you may want to get some ported heads and do a head and intake swap.
Old Dec 6, 2007 | 07:23 PM
  #20  
gears94gt's Avatar
gears94gt
3rd Gear Member
 
Joined: May 2007
Posts: 528
From: miami,fl
Default RE: upgrades?

you can star with these mods then if your not happy with the power add a litlle more.
s-2 vortech s/c
power pipe.
precision intercooler
trick flow manifold
75mm throtlle body(bbk)
42lbs injectors
cobra dual fuel pump
manaflow exhaust x-pipes
had 3.73 which lasted 2 months changed to 4.10s
eibach springs
subframes connectors
rear control arms
just purchased 18x9 18x10.5 cobra wheels with vredestein tires.
hid- all the way
complete sound system upgrades ipod ready.
predator and tune.
upgrade front brakes calipers
i know im forgetting something



All times are GMT -5. The time now is 02:43 PM.