OK I called Summit up and told them to cancel my order for the Trick Flow Intake. I went onto Patriot Performance website, and they got the special where I buy a set of heads and cams, the cams will only cost me $400. The heads will be $1295, which I will be getting. Any idea of how much power will I be making?? I am hoping it will 300hp. Has anyone installed it by themselves, how hard is it to do on your own??

 

Put on the headers, get a good tune, and you'll make 300. With stage 2 stuff.

 

Sorry this isn't going to help you but do you have a link? I don't see any package deals on their site.

 

should make a lil over 300rwhp with a good tune plus thoes headers

 

Hope you don't go stg 3cams. Either that or expect PTV clearance issues.

 

I called patriot performance and asked them, if you go under there cams you will see that they only cost like $400 or $450 and thats if you buy a set of heads from them at the same time. My wife gave me the ok to buy the set.

 

Thats sweet. Just got an email back from Fox Lake. I guess they do a package deal called P-51 power pak for $3495 for H/C/I and the fuel rails. Said on a stock stang they have seen an 87rwhp increase.

Or for $2495 you could go with the Patriot package and the P-51... and then like $500 either way for the tune i suppose too.

 

im also doing heads cams headers.... stage 2 comp cams, stage 2 patriots and mac long tube ceramics...so i should see over 300?? (with other small bolt on's to)

 

yup and dont forget a tune