When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i will be looking to spend anywhere up to $10,000
suggestions?
just forge your shorblocks bottom end and slap a turbo on there. u can get 600~ hp our of ur 2v with heads and cams and seriously are u wanting more than that?
i would just go with getting your motor bored out .30 over and blueprinted, get a forged rotating assembly(good for up to 1000hp), stage 3 heads and turbo cams, and a set of twin turbos from hellion. then you are going to need to get fuel system and driveline upgrades like clutch and stuff like that. and throw a new tranny in there as well. you are probably gonna spend more between 15k-20k before everything is said and done. especially if you have someone else do the work. but go 2v not 4v.
i will be looking to spend anywhere up to $10,000
suggestions?
Thats not gonna buy much. Maybe a forged shortblock, heads, cams, and vortech system with mild fuel system and let you make around 500-550rwhp.
If you want turbos get another $10,000 togather.
Thats not gonna buy much. Maybe a forged shortblock, heads, cams, and vortech system with mild fuel system and let you make around 500-550rwhp.
If you want turbos get another $10,000 togather.
Isn't that ridiculous, you can't get much done with 10k these days.
Isn't that ridiculous, you can't get much done with 10k these days.
for 10k i just got on MMRs site, got the 600hp shortblock, went to CMS got fox lake stage 2 heads and 2v blower cams, cam gears, valve springs, FULL suspension setup from AM+ 31 spline dif axels with driveshaft and flywheel.
for 1500 more u can build a vortech system buying everything separate and have a pretty mean ride id say u get a bit more than it seems