NeoTokyo

Hey everyone;

I am looking to buy a set of 06' GT 24lb injectors from a local shop and was wondering if they will plug into a new edge injector connector.

I know they are both EV6 injectors but I just dont know if the plug changed at all.

Also is there anything that would keep these from working on a New Edge? Ohm resistance? Anything?

It doesnt seem like there is much info out there for this but being that they are EV6 I am about 70% sure they will work, I just want to make sure before I buy them because they offer no returns.


Thanks everyone.


-Eric-

CAMDUP

they are not both ev6.....

http://www.steeda.com/products/ev6-ev1_harness.php

livefast1

Y would you want to?

NeoTokyo

I checked, they are different.

NeoTokyo

I don't have the old 94-98 EV1 plug connectors anymore, I modified my harness when I bought my 00' engine so I wouldn't have to buy different injectors (different flow rates)

It works great but I need more and I have 1 injector acting up.

I was told S197 injectors were EV6 but that the shop owner (seller) wasn't sure if they had the same plug.

Thanks to CamDup's reply and link I see that S197's are EV14's now.

Also looking at google pics helped too.

Thanks for that info again.

-Eric-