Finally fixed my exhaust tips *PICS!!*
#22
a dremel with the metal saw off attachments.. it took about 2 hours to do bc we had to make 4 combined cuts bc the dremel wouldnt go into the tip all the way to make one big cut... plus, the dremel was overheating or something. it was getting too hot to hold!
after we cut it, the bare metal was showing. Since we were spraying my friends brush guard, we sprayed the inside of my tail pipes with black spray paint.. the rest of the blackout shall come from exhaust fumes
after we cut it, the bare metal was showing. Since we were spraying my friends brush guard, we sprayed the inside of my tail pipes with black spray paint.. the rest of the blackout shall come from exhaust fumes
#23
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM
zanemoseley
2005-2014 Mustangs
6
09-06-2015 12:58 PM