281 Internals?
#31
Numedia dragway in numedia pa, pretty much bloomsburg. The track is on the slower side but its the closest thing to wb scranton area next woild be island dragway in NJ, fridan night drags is fun there. As far as cars getting done im hoping mine is done, helicoils came out good and the motors almost ready to drop it. Still dont know whats gonna happen with the 2.55 pulley and fuel system on the dyno, inforget whats on it now was either a 3.4 or 3.2, but dropping it down to 2.55 should pick up se good power if i dont get belt slip, making 420rwjp on the current pulley so hopefully its around 500 all said and done, that poort t45 is gonna cry
#32
I spent a good hour ornso bull****tin with howard from howards engine last night, semi retired performance engine builder, and after looking what mod motors cost this will indeed be my last mod build. When howard can pump out a 500-550rwhp windsor motor turnkey for $7500 thats a no brainer for my next build.
#36
Pushrod is def the way to go for a strip car IMO, if Johnny Bunks fox with a full interior street car goes 10.20s all day in the quarter with 440rwhp.........team x control arms, factory front suspension, lakewood shock and struts and a 408w with heads and cam. 8.8 rear with a spool and 35 spline. Thats a cheap build and is runnin times that 600+horse modular street cars run. BTW Steve howard said bunk wasn't our cruisin the streets because he popped his 100$ ebay special rods he put in that 408. Should be back out this year, must be nice running 10s on 408 he build for 4 grand, but I guess the cheapo rods struck again.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-08-2015 11:50 AM