Best Crate engine
05-10-2006, 01:20 AM
#13
5th Gear Member
Join Date: Jul 2004
Location: Westminster, MD
Posts: 4,343
RE: Best Crate engine
buy new stock short block for $500
Trick Flow TwistedWedge top kit ( heads cam intake the works ) $2,200
have someone assymble it for you $500
Total ............ apx. $3,500 give you about 350hp engine.
Trick Flow TwistedWedge top kit ( heads cam intake the works ) $2,200
have someone assymble it for you $500
Total ............ apx. $3,500 give you about 350hp engine.
05-10-2006, 01:49 AM
#17
2nd Gear Member
Join Date: Mar 2006
Location:
Posts: 183
RE: Best Crate engine
I've been looking at the 347's from CHP they are pretty reasonable at around $2500 for a shortblock but I am thinking of going for a dart block and that bumps the price up quite a bit. I know the long blocks come with AFR's but they were around the $6k mark from what I've seen, I think I'd go with the shortblock and bolt the AFR's on seperate, or if I go with a dart I'll but the 347 kit and have it built instead.
05-10-2006, 01:52 AM
#18
5th Gear Member
Join Date: Mar 2006
Location: San Antonio Tx
Posts: 2,271
RE: Best Crate engine
citymotorsupply.com they have pretty cheap long, and short blocks. I got my 351 from there and it runs fine. I think i walked out with a reman. short block, and all gaskets for like $500. I dont know if they can ship, but give it a shot
05-10-2006, 02:07 AM
#19
6th Gear Member
Join Date: Feb 2006
Location:
Posts: 5,263
RE: Best Crate engine
Shyt they're even cheaper
http://citymotorsupply.com/top100.asp
www.tbolt.net $650 minus $150 core charge = $500
http://citymotorsupply.com/top100.asp
www.tbolt.net $650 minus $150 core charge = $500
ORIGINAL: ZachW04Stang
Where can I buy a new stock short block for that price? I'd order one tonight if you can get me a link or a phone number.
buy new stock short block for $500
Trick Flow TwistedWedge top kit ( heads cam intake the works ) $2,200
have someone assymble it for you $500
Total ............ apx. $3,500 give you about 350hp engine.
Trick Flow TwistedWedge top kit ( heads cam intake the works ) $2,200
have someone assymble it for you $500
Total ............ apx. $3,500 give you about 350hp engine.
Thread
Thread Starter
Forum
Replies
Last Post
AmericanMuscle4.6GT
2005-2014 Mustangs
7
11-10-2015 02:06 PM
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM
