G TEch computer need help!
#1
G TEch computer need help!
Hi.
I bought a G-Tech pro SS in May
Tried in my 87 GT few weeks ago.
work all good.
Programmed it right and calibrated RPM right on the dot.
Now today I go to do it and RPM does not go over 2500 on the G-Tech but on the car's gauge all works good.
SO I re-do on the settings again.
Still does the same.
I went right after and tried it on my friends civic did all his settings and went to do a few runs.
All was 100%
So I got and re-do the setting for my car and it dont work.
So I am thinking something is screwed with the 8 cylinder setting cause rpm does not go over 2500RPM
Then after the RPM calibration it ask you to choose the closest setting .
I did that and still the same problem.
So I decided to take this further
Tried in my moms echo.
Work 100%
Tried in my dads 6.0L chev
still stays at 2500
So now I know its the computer.
Anybody had this problem?
Now I will tried for a warranty
Any luck with that guys?
I bought a G-Tech pro SS in May
Tried in my 87 GT few weeks ago.
work all good.
Programmed it right and calibrated RPM right on the dot.
Now today I go to do it and RPM does not go over 2500 on the G-Tech but on the car's gauge all works good.
SO I re-do on the settings again.
Still does the same.
I went right after and tried it on my friends civic did all his settings and went to do a few runs.
All was 100%
So I got and re-do the setting for my car and it dont work.
So I am thinking something is screwed with the 8 cylinder setting cause rpm does not go over 2500RPM
Then after the RPM calibration it ask you to choose the closest setting .
I did that and still the same problem.
So I decided to take this further
Tried in my moms echo.
Work 100%
Tried in my dads 6.0L chev
still stays at 2500
So now I know its the computer.
Anybody had this problem?
Now I will tried for a warranty
Any luck with that guys?
#2
RE: G TEch computer need help!
Im not exactally sure why its doing that. Did you just erase all the data in the G tech and completly start over reduing ALL of the calibrations for the Stang?
I would try that first. I have no problems with mine on my 93 GT
I would try that first. I have no problems with mine on my 93 GT
#4
RE: G TEch computer need help!
Im not sure what other calibrations there are on there but I know there are more... theres the axle calibration, rpm's, weight, etc.
Also, did you make sure that the g tech was level? Im not sure but that could possibly throw some readings off causing it to not work...
Also, did you make sure that the g tech was level? Im not sure but that could possibly throw some readings off causing it to not work...
#8
RE: G TEch computer need help!
ok thanks guys
I sent email to G tech
sent exactly what i wrote here
So they wil tell me whats wrong or about warranty.
probably take a month for a reply
but
if anyone on here no what i can do please let me know
thanks
I sent email to G tech
sent exactly what i wrote here
So they wil tell me whats wrong or about warranty.
probably take a month for a reply
but
if anyone on here no what i can do please let me know
thanks
Thread
Thread Starter
Forum
Replies
Last Post