cam,intake,and heads or supercharger?
08-18-2006, 05:44 PM
#12
6th Gear Member
Join Date: Feb 2006
Location:
Posts: 5,263
RE: cam,intake,and heads or supercharger?
you can also get custom tune once you get everything installed for about $400-500
usually cost another $100 for them to tweak it later if you change something.
I would do the H/C/I first too.
usually cost another $100 for them to tweak it later if you change something.
I would do the H/C/I first too.
ORIGINAL: 2 kwik
well first I would invest in a tweecer rt,f.a.s.t.,or pms stand alone system as those puters in the 94-95 are a POS and will make you pull your hair out
well first I would invest in a tweecer rt,f.a.s.t.,or pms stand alone system as those puters in the 94-95 are a POS and will make you pull your hair out
08-18-2006, 07:31 PM
#13
4th Gear Member
Join Date: Jun 2005
Location: TEXAS
Posts: 1,092
RE: cam,intake,and heads or supercharger?
if you want more power now get a supercharger. H/C/I your gonna get about 300-315rwhp with any off the shelf kit for around $2000. A supercharger is gonna cost around the same, but with minor mods to it you could be looking at 350rwhp
Or just turbo it and have fun, but those cost "a bit" more if i remember right
Or just turbo it and have fun, but those cost "a bit" more if i remember right
Thread
Thread Starter
Forum
Replies
Last Post
Luke9222
4.6L General Discussion
19
10-22-2015 11:55 PM
uberstang1
Classic Mustangs (Tech)
6
09-20-2015 06:42 PM
Daddys Girls GTs
5.0L (1979-1995) Mustang
3
09-14-2015 08:46 PM
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM
