a few issues.
08-19-2006, 02:19 AM
#1
4th Gear Member
Thread Starter
Join Date: Apr 2006
Location:
Posts: 1,698
a few issues.
well during my reassembly i have a few problems. f
1- for one the diver side header bolt near the firewall wants to always go in cockeyed. anyway to fix it??
2. there is a senser on my car (looking from the front of the car at the engine) its about halfway up the timing chain cover on the side of the block on the driver side.....its busted off
3. my harmonic balancer will not go back any farther, its out about an 1/8th of an inch to far. ive tryed putting the retaining nut on there adn turning it over but it ended up turning the balancer over.
4. the power steering pully will not go back far as it sould be. im about to take it and smack it with a hammer very soon. we tryed to use the puller we used to back it u[ a littel bit to push it back in but it wont seem to go any farther
any help would be great/
1- for one the diver side header bolt near the firewall wants to always go in cockeyed. anyway to fix it??
2. there is a senser on my car (looking from the front of the car at the engine) its about halfway up the timing chain cover on the side of the block on the driver side.....its busted off
3. my harmonic balancer will not go back any farther, its out about an 1/8th of an inch to far. ive tryed putting the retaining nut on there adn turning it over but it ended up turning the balancer over.
4. the power steering pully will not go back far as it sould be. im about to take it and smack it with a hammer very soon. we tryed to use the puller we used to back it u[ a littel bit to push it back in but it wont seem to go any farther
any help would be great/
Thread
Thread Starter
Forum
Replies
Last Post
lincolnshibuya
V6 (1994-2004) Mustangs
9
12-08-2015 04:37 PM
mungodrums
S550 2015-2023 Mustang
7
09-29-2015 09:18 PM