finally new pictures of the 5.0
#1
![Default](https://mustangforums.com/forum/images/icons/icon1.gif)
ok those of u who have read my "new 331 stroker" forum have seen the motor i finally got the hood painted and the motor is running 13.6 on street tries and just a basic tune still needs a dyno tune, hoping with a tune and maybe some new shocks i can drop it into the 12.9 area, then with the 200 wet shot plate kit from trickflow maybe hit some where in the 10's, heres a few new pics of the car
in the garage
front shot
side shot
in the garage
front shot
side shot
#4
![Default](https://mustangforums.com/forum/images/icons/icon1.gif)
ya i would like to lower it but i need to make custom hangers for the o/r x pipe, the x-pipe was custom made and with the BBK LT headers the hangers arent in the right spots anymore so the exhaust sags in the middle for now, i tryed to make a sound clip of it when i first had it running off the headers but it was too loud so in the microphone it just sounded like some one was blowing into the mic, ill probly get some video and sound clips soon
#6
![Default](https://mustangforums.com/forum/images/icons/icon1.gif)
#8
![Default](https://mustangforums.com/forum/images/icons/icon1.gif)
Thats nice man, I want a stroker for mine. Haha. Do you have any trouble with rough idle or fouling plugs. I don't have a stroker motor but, kind of similar setup. I can change the plugs and wires in my car and it will run great, but a few weeks later it will start running rough again. I haven't had mine dyno tuned yet either. I have been told that the 94-95 didn't take well to mods, and that it had something to do with the cars temperature. Anyone have any advice.
#9
![Default](https://mustangforums.com/forum/images/icons/icon1.gif)
the computers are so touchy in them they dont take well to mods, and occasionally the idle is rough and bounces around and trys to die but for the most part it runs fine, i have a chip in it, it was pre tuned to my motor so its only tuned so the car will start and drive with the new motor, you can get a computer from an older car to fix it, or i can just go get a dyno tune and set my idle speed higher with the chip
Thread
Thread Starter
Forum
Replies
Last Post