jtmustang

we'll i am in the process of getting parts rounded up to rebuild the motor in my 91 gt. am now leaning towards a 331 kit but i have already purchased a b-303 cam and a trickflow street heat intake and now i am wondering if the cam is going to be to little for this setup any info?

jtmustang

anybody

ih8chevy

yes

the b303 is a mild cam for the stock 5.0, it will do nothing for ur stroker.

gspfunk

Unless you really want to buy another cam, put some 1.7 rockers on it....it'll be fine.

Mustangkiler

Id just sell the cam seeing as how you wont be out much since there only 170 brand new

thesource

A b cam is pretty small for a 331 unless its going to be a daily driver . If it is , add some 1.7s and use it . If you are looking for bigger gains and don't mind the idle being a little rough , get the Comp Cam 282HR or a TFS stg 3 cam for it .

2 kwik

dude with the stoker a nice SMALL daul pattern cam will work great

jtmustang

thats what i thought a little too small

QWK90GT

I have a b-303 in my car with the following mods 331, edelbrock heads and rpm intake with a vortech A-trim. The car makes 415 rwhp so I think the came is fine for your combo. I would recommend 1.7 rockers.