BackInBlack90LX

im installing my bbk CABLE KIT, CLUTCH, ADJUSTABLE, W/ QUADRANT AND FIREWALL ADJUSTER


i was wondering if you guys know if im doing this right
that rubber gromet goes over the end of the cable and then the adjuster goes over it right? because its not letting me do it with out modifing it

jtmustang

don't know but would like to know also just bought the same stuff,sorry no help

mattdel

bump for my pal, i'm a tad impaired right now and cannot think[sm=alcoholic.gif][sm=partyparty.gif]

rocketrotary

Impaired? Honestly, I'm not as think as you drunk I am!

Vic

BackInBlack90LX

well its getting dark and i got pissed so i cut the F ing thing

gspfunk

My Steeda kit had a different rubber grommet and it said to just take it off completely..... You should be fine the way you did it.

AdderMk2

take the rubber off completely, it will infact make it more difficult to adjust it if its still on there...

There should also be 4 small plastic nubs on the white piece that will need to be trimmed to get the adjuster over it

BackInBlack90LX

welll i got it all hooked up i dont know if i have it adjusted right i just know that the clutch pedal is hella stiff now

AdderMk2

it shouldnt be stiff at all... and you really should remove that rubber

BackInBlack90LX

[align=left]u think the rubber is causing it to be stiff or its not adjusted right?
[/align][align=center] [/align]