Stinger

Try un hooking ur negative cable for about 20 minutes to reset computer that could be a quick fix.

BlueDemon

Thanxs again ROUNDMAN , I got it set to 98 but what did you mean by checking the WOT to make sure its above 4.0 volts? Do you mean putting the negative from the voltameter to the orange wire and the positive from the voltameter to the green wire? When I do that I get 4.12 is that good enough? Thanxs again---If you lived around here I'd go out and buy you a couple cases of beer!!!![sm=icon_cheers.gif]

roundman

no, you still have the probe hooked up onto the green wire, just move the throttle and see if the voltage changes and make sure it goes to at least 4 volts at WOT.
I'll let you owe me the beer for the time being! LOL