how to install intake?
#11
RE: how to install intake?
You also need to unplug your injectors and the rest of the wiring harness and move it aside... Then your fuel rail needs to be removed from the top of your injectors and move it aside...Then unhook your coolant lines
#12
RE: how to install intake?
Here is a fairly detailed article explaining how to install an Explorer / GT40 intake on a Mustang.
#13
RE: how to install intake?
#14
RE: how to install intake?
ORIGINAL: 88canadianstang
Not required...... I did mine last summer and did not need to do this, make it as litttle work as possible it makes putting everything back together much easier.
You also need to unplug your injectors and the rest of the wiring harness and move it aside... Then your fuel rail needs to be removed from the top of your injectors and move it aside...Then unhook your coolant lines
edited to add: or did you meanyou just removed the rails and actually left the injetors attached to the rail and wire harness? Personally, that seems like too much extra effort really... trying to keep it out of the way and tryin gto keep the fuel from spilling out.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-01-2015 08:16 PM