weld draglite question
#22
RE: weld draglite question
ORIGINAL: 89 NoTcH
[IMG]local://upfiles/42726/F1244DD3C810418CA70ADCD395896096.jpg[/IMG]
[IMG]local://upfiles/42726/F1244DD3C810418CA70ADCD395896096.jpg[/IMG]
#24
RE: weld draglite question
Those look like sn 95 brakes. You should be able to get them to clear without a spacer. You might have to hit them with the die grinder to clearance them just a little bit.
#27
RE: weld draglite question
I have spacers on my Kragers... no problem their either. They are really nothing to worry about. When I worked at a tire shop, I've had to use spacers on several vehicles we put custom rims on... never had a problem or a complaint.
Vic
Vic
#28
RE: weld draglite question
to whoever has used spacers, did you use them because of clearence issues with the caliper like i am having? also, what size should i use? and if i use a 1/2" for example this means the studs will be a 1/2" inside of the rim, will that still be ok/safe. is there still enough bite from the lug nuts to keep everything together?
#29
RE: weld draglite question
OK, check the back spacing on the front wheels. The fox body needs 1.750" back spacing to clear everything. If you havemore than that you will run into problems like your having. You should be able to use a 1/4" spacer behind your wheel and be ok. Try that before you do something drastic.
Ryan
Ryan
Thread
Thread Starter
Forum
Replies
Last Post
AMAlexLazarus
AmericanMuscle.com
3
10-02-2015 08:06 AM
AMAlexLazarus
AmericanMuscle.com
0
10-01-2015 09:21 AM