take a look at this intake manifold!!!!
03-28-2007, 07:34 PM
#4
3rd Gear Member
Thread Starter
Join Date: May 2006
Location:
Posts: 668
RE: take a look at this intake manifold!!!!
no the car runs strong... just not as strong as a car with gt40 upper lower, gt40 heads, svo roller rockers, full exaust, ignition. i dont know what to do. its my DD but im tempted to take it all out and start over. i would try to have it done in about 2 weeks. got any ideas???
03-28-2007, 07:35 PM
#5
3rd Gear Member
Join Date: Jun 2005
Location:
Posts: 694
RE: take a look at this intake manifold!!!!
is the car modded? i would say your pcv system is sucking up oil, or your pulling oil in through your valve covers. do you have after market cover? is the baffle on your stockers on? do you see oil in your TB?
03-28-2007, 07:45 PM
#6
3rd Gear Member
Thread Starter
Join Date: May 2006
Location:
Posts: 668
RE: take a look at this intake manifold!!!!
yea the car has many bolt ons. see above. the pcv seems to be working well. there is NO oil in the TB but the upper intake looks horrible! i did a compression check on it a little while ago and it took 3 rotations of the engine to pump up to 150 psi. i thought that was pretty high. like the pics show, only a few are sh*** looking the rest have mild residue
03-28-2007, 10:24 PM
#9
3rd Gear Member
Join Date: Dec 2006
Location:
Posts: 621
RE: take a look at this intake manifold!!!!
Most intakes will pull oil inside the intake..past the filter screen, past the PCV valve and into the intake...in due time it will make it's way into the ports, likely somewhat blowby related.
03-28-2007, 10:56 PM
#10
3rd Gear Member
Thread Starter
Join Date: May 2006
Location:
Posts: 668
RE: take a look at this intake manifold!!!!
both are upper and lower are gt40 intake. is anyone framiliar with 1.72 rollers and a after market cam?? will a high duration cam cause the valves to hit with 1.72 rockers??