NYMustang50

Im looking to change my rear end gears from 2.73 to 3.73 but I was told by someone since I have 2.73 I need to change the carrier as well. Is that true? I wanted to keep the old carrier untill I put in 30 spine axles in. So do I have to swap a new carrier in or can I use whats in there. Its a limited slip in there now.

HC_CrAzYHoRsE

no idea who told you that, but he's smoking some good shizz.

AdderMk2

the person who told you that must have misunderstood what you meant. If you were to install 31 spline gears, you would need a new carrier. And personally I think you should wait.

There is no point to pay to get your gears setup now, just to have to re-do the whole thing again when you get the new carrier and axles

NYMustang50

Cant I when I want to put in new axles put and put in a new carrier just switch over the ring gear from the stock carrier to the new one?

AdderMk2

nope.. you have to re-measure everything and re-shim it if its off