95stang5.0

Ok, So I fnishied the Trick Flow Top end kit and someothe stuff on my 95. Its not to bad is it the best i could have got? No probably not but its a good startet motor. So anyway i think i have to high of oil pressure because there is oil leakin out around my filler tube in the valve cover, and some comes out the dipstick. It doesnt pour out it just slowly like seaps. Not to big of concern but I want to get it fixed so how does everyone recoomend fixing it> Breather tubes? If so which ones and how do I install them? Also I know this is a mustang forum but I have a 2000 ford focus too. I wanderd if anyone has changed the front drivers side wheel bearin in one or knows how to. I have never donea front wheel drive. Is there any differnce. Thanks,

95stang5.0

no one?

mattdel

get a new pcv

WhiteWindsor

Sounds like you have too much crankcase pressure. Try the new pcv like mattdel said or valve cover breather.

95stang5.0

Yeah I Installed a new one when i did the HCI PCV valve i dono wat the deal is.

dimebag

wheel bearing is easy.....

ahittz24

Do you have the hose running from the oil filler to the tb? That is a nessescary component to the pcv system.

Curlytop

valve cover breather is probably the answer. get rid of the pressure.