Shelty

how hard is it to replace the door locks? my drivers one is rather screwy and doesnt lock right, I'll just replace them when I get paid...

kilgorq

Not any more difficult that replacing a window regulator motor. Actually a little easier.

Shelty

cool, are there any rivets and such I have to drill out?

kilgorq

1 Rivet on the same side of the door as the latch. I used a 1/4" Cap screw and nut to replace the rivet on the new one. But some of the new ones come with a rivet.

The hardest part was getting the door open because the old actuator was jammed.

Shelty

thanks man,

stang8689

Real easy, pull the door panel then drill out the rivet, i would plug in the new acuater brfore riveting, its easier