Luberacating ball joints

Reply Subscribe

Thread Tools

Search this Thread

Oct 15, 2007 | 12:04 AM

Mustangn

Thread Starter

1st Gear Member

Joined: Apr 2006

Posts: 101

Luberacating ball joints

There is a greese nipple on the bottom sideon the ball Joints. Has anyone pumped greese through there? If you have Do I need to jack up the car to do this? 91 GT Stock
Thanks

Oct 15, 2007 | 12:23 AM

AdderMk2

Banned

Joined: Dec 2005

Posts: 22,374

From: Lil' Rhody

RE: Luberacating ball joints

no you dont need to jack it up... but you need a grease gun atleast

Oct 15, 2007 | 05:50 AM

capri debris

3rd Gear Member

Joined: Nov 2006

Posts: 823

From: PA

RE: Luberacating ball joints

Tie rod endstake grease, but the ball joints on the front control arms DON'T get greased. They are teflon on the inside and sealed for life... they are supposed to last like 250,000 miles before needing replaced. Do not try to grease them.

Oct 15, 2007 | 09:25 AM

Hawk

3rd Gear Member

Joined: Apr 2006

Posts: 551

From:

RE: Luberacating ball joints

Replacment ball joints will probably have the grease point. Like adder said, just get a grease gun and get under the car and put some grease in them. You don't need to jack the car up.