what all do i need to do a cam swap?
#1
what all do i need to do a cam swap?
hey. I have a OEM 95 Stock Cobra upper and lower intake that i am gonne put on my car along with a cam. i havent got the cam yet.. but i am goin to buy it this week.. just have to decide on a b303 or a e303. anyways.. i already have the intake gaskets.. which by that i have the 2 "head to intake"gaskets and the one that goes inbetween the upper and lower.. what else do i need to do the cam swap? tell me everything that way i will be good to go this weekend. and.. what is the plus in those 1 inch spacers that go inbetween the upper and lower intake? i have seen them all over the place but what do they do? thanks a bunch!!
#2
RE: what all do i need to do a cam swap?
i wouldnt put in a cam until you get some better heads. our cams are pretty good stock and i have read somewhere that someone was making around 350hp with a stock cam. just go to the junkyard and get some gt 40 heads, and buy some crane 1.7rr to give your stock cam more lift. if you shop right yo can get all that for around 400 bucks. and add 40hp in the process.
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM