white faced gauges
12-04-2007, 01:20 PM
#1
white faced gauges
I was wondering how hard it is to install white faced gauges on a '91 cluster. I have a 140mph speedo
are the white faces simply overlays? could an amateur car enthusiats (like myself) beable to pull the cluster out, do the faces and put it back together without screwing anything up?
is there some special tool for taking the needles off?
thanks
are the white faces simply overlays? could an amateur car enthusiats (like myself) beable to pull the cluster out, do the faces and put it back together without screwing anything up? is there some special tool for taking the needles off?
thanks
12-04-2007, 01:33 PM
#2
1st Gear Member
Join Date: Oct 2007
Location: Nashville, Tn
Posts: 141
RE: white faced gauges
Here is how to remove the cluster.
https://mustangforums.com/m_3591186/...tm.htm#3591186
It's under the heading Tech Articles in the 5.0 Forum.
Somewhere I've seen a writeup on how to install the white face guage overlays. Sounds like a nightmare to me! Perhaps, if I needed to remove the cluster for some other reason, I MIGHT do it!
[IMG]local://upfiles/81587/A2F128D5B73B4A6F9ECD623E6CB51976.jpg[/IMG]
https://mustangforums.com/m_3591186/...tm.htm#3591186
It's under the heading Tech Articles in the 5.0 Forum.
Somewhere I've seen a writeup on how to install the white face guage overlays. Sounds like a nightmare to me! Perhaps, if I needed to remove the cluster for some other reason, I MIGHT do it!
[IMG]local://upfiles/81587/A2F128D5B73B4A6F9ECD623E6CB51976.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM