Installed Stuff Today
04-22-2005, 12:31 AM
#1
1st Gear Member
Thread Starter
Join Date: Apr 2005
Location:
Posts: 78
Installed Stuff Today
I installed a Catco H-pipe, PITA to fit it properly
Flowmaster AT catbacks
BBK air intake, I hate it, it sounds like bearings grinding constantly
BBK UD's Awesome
3.73's go in next week.
The 95 mustang is starting to awaken
Flowmaster AT catbacks
BBK air intake, I hate it, it sounds like bearings grinding constantly
BBK UD's Awesome
3.73's go in next week.
The 95 mustang is starting to awaken
04-23-2005, 12:33 AM
#8
5th Gear Member
Join Date: Mar 2005
Location:
Posts: 3,967
RE: Installed Stuff Today
Here it is. Im planning on purchaseing a 5.0L. something i can modify this is the intake i would be getting. http://www.sdpc2000.com/catalog/1706...nifold-Kit.htm
you should be able to find this much cheaper. just go buy a 5.0 mustang magazine or a MM&FF you should be able to get one for around 500
i would also get the GT40X heads and a X303 cam but i dont believe either of those is anywhere near street legal. this is what i would do in my 5.0
you should be able to find this much cheaper. just go buy a 5.0 mustang magazine or a MM&FF you should be able to get one for around 500
i would also get the GT40X heads and a X303 cam but i dont believe either of those is anywhere near street legal. this is what i would do in my 5.0
Thread
Thread Starter
Forum
Replies
Last Post
kawiguy827
5.0L GT S550 Tech
0
09-01-2015 07:09 PM