5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

5.0 rebuild question..

Thread Tools
 
Search this Thread
 
Old 07-10-2008, 06:10 PM
  #11  
stangman94
4th Gear Member
 
stangman94's Avatar
 
Join Date: Oct 2006
Location: Michigan
Posts: 1,561
Default RE: 5.0 rebuild question..

Well you might want to switch your cam if its stock. I wouldgo with 3.73's if its a manual and 4.10's if its an auto. 75mm throttle bodie seems a little big for your setup. I would go with a 70 or 65mm. Sinced you have a 94 you also need to buy and elbow adapter for you intake manifold. They run around 100 bucks http://store.summitracing.com/egnsea...=KeywordSearch


If you want a good priced throttle bodie go with proffesional products I like mine.

You might want to upgrade your fuel pump as well.
stangman94 is offline  
Old 07-10-2008, 08:17 PM
  #12  
08Ninja
1st Gear Member
Thread Starter
 
08Ninja's Avatar
 
Join Date: May 2008
Location:
Posts: 124
Default RE: 5.0 rebuild question..

Thanks for the infor about the adapter!!
08Ninja is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Urambo Tauro
5.0L (1979-1995) Mustang
6
10-05-2015 09:37 PM
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
Dathan
V6 (1994-2004) Mustangs
4
10-05-2015 05:52 AM
Drastang
4.6L (1996-2004 Modular) Mustang
2
09-30-2015 03:48 AM
treesloth
New Member Area
4
09-28-2015 07:03 AM



Quick Reply: 5.0 rebuild question..



All times are GMT -5. The time now is 01:32 AM.