MustangForums.com

5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Radiator Problems

Thread Tools
 
Search this Thread
 
Old Sep 1, 2008 | 11:26 PM
Share
  #21  
five.0's Avatar
five.0
Thread Starter
 
Joined: Aug 2008
Posts: 25
From: california
Default
so i did everything today flushed it bought a new thermostat and new antifreeze and its still doing the same thing. i'm not sure what to do t'm thinking it might be the water pump??
Reply
Old Sep 1, 2008 | 11:54 PM
Share
  #22  
five.0's Avatar
five.0
Thread Starter
 
Joined: Aug 2008
Posts: 25
From: california
Default
Off subject but whats the best camshaft to get?? i have an auto lx with just a few bolt on's what should i get.
Reply
Old Sep 2, 2008 | 12:33 AM
Share
  #23  
mstngsule68's Avatar
mstngsule68
4th Gear Member
 
Joined: Apr 2008
Posts: 1,025
From: milwaukee NOT THE GHETTO PART
Default
did you *burp* the system? might be an air bubble trapped. and again is the gauge good??????? did you try the in cap gauge?
Reply
Old Sep 2, 2008 | 12:46 AM
Share
  #24  
five.0's Avatar
five.0
Thread Starter
 
Joined: Aug 2008
Posts: 25
From: california
Default
cap guage?? i think My Temp gauge is bad i also was thinking maybe its my temp sending unit?? have any ideas and what kind of cam should i get??
Last edited by five.0; Sep 2, 2008 at 12:49 AM. Reason: mispelling
Reply
Old Sep 2, 2008 | 12:52 AM
Share
  #25  
mstngsule68's Avatar
mstngsule68
4th Gear Member
 
Joined: Apr 2008
Posts: 1,025
From: milwaukee NOT THE GHETTO PART
Default
http://store.summitracing.com/partde...5&autoview=sku

make sure you get a 16lb'er...its basicly like sticking a thermomter in your coolant but without the added spill
Reply
Old Sep 2, 2008 | 12:52 AM
Share
  #26  
mstngsule68's Avatar
mstngsule68
4th Gear Member
 
Joined: Apr 2008
Posts: 1,025
From: milwaukee NOT THE GHETTO PART
Default
p.s. they sell'em at your local auto part store.
Reply
Old Sep 2, 2008 | 12:56 AM
Share
  #27  
five.0's Avatar
five.0
Thread Starter
 
Joined: Aug 2008
Posts: 25
From: california
Default
yea i called kragen they don't sell them. i called napa they don't have them umm i have one more place i can call tomorrow. and that's about it and if not i will order one online.
Reply
Old Sep 2, 2008 | 12:57 AM
Share
  #28  
mstngsule68's Avatar
mstngsule68
4th Gear Member
 
Joined: Apr 2008
Posts: 1,025
From: milwaukee NOT THE GHETTO PART
Default
autozone for sure has them and advance might.....time to bust out the yellow pages lol
Reply
Old Sep 2, 2008 | 01:00 AM
Share
  #29  
five.0's Avatar
five.0
Thread Starter
 
Joined: Aug 2008
Posts: 25
From: california
Default
i could try autozone. I dont think we have an advanced out here. but if not mos def bust out the yellow page. lol besides that what type of cam should i get?
Reply
Old Sep 2, 2008 | 01:40 AM
Share
  #30  
mstngsule68's Avatar
mstngsule68
4th Gear Member
 
Joined: Apr 2008
Posts: 1,025
From: milwaukee NOT THE GHETTO PART
Default
is it a roller cam?
Reply



Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -5. The time now is 11:20 PM.