redmustang83596

I have power windows in my fox. Its a 90 GT. Its a roller, so there is no engine/trans. The wiring harness is practically non-existant. My driver side window is down though, and I need it up. Is there a way I can roll up a power window with no power? I have the door panel off and I can see the mechanical stuff that rolls the window up, but I dont know what I need to do to get it rolled up.

PRO50SC

Get a 12 volt battery and 2 jumper wires. You can hook directly to the window motor and operate it like that. Very simple. Hook the wires up one way for down, reverse for up.

1995mustang818

or take out the 8mm bolts off the motor move the motor to the side pull the window up have some one hold it up for you on put the motor back on