efi to carb ?
02-20-2010, 09:51 PM
#1
Thread Starter
Join Date: Dec 2009
Location: ill a noise
Posts: 44
efi to carb ?
i already have a efi fox so dont ask me why iam carbing my 5.0
My question can i temporarily use the stock pump (efi ) with a inline regualtor (set 7.5 -8 ) to start and tune my car ( budget is not aloowing for complete fuel system rihgt this second but itching to see what she runs like ) and if so do i just splice in to the relay under the seat ??
My question can i temporarily use the stock pump (efi ) with a inline regualtor (set 7.5 -8 ) to start and tune my car ( budget is not aloowing for complete fuel system rihgt this second but itching to see what she runs like ) and if so do i just splice in to the relay under the seat ??
02-20-2010, 10:46 PM
#3
Thread Starter
Join Date: Dec 2009
Location: ill a noise
Posts: 44
but i guess we'll find out ./...
my ohter ? is what would be done with the return line
02-20-2010, 10:54 PM
#4
The return line hooks up to the regulator
it should be fine, i have seen a few cars run this with no problems
There is one guy one here that ran one without a return. His only saw 9 pounds.
it should be fine, i have seen a few cars run this with no problems
There is one guy one here that ran one without a return. His only saw 9 pounds.
Last edited by TrimDrip; 02-20-2010 at 11:05 PM.
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM
Daddys Girls GTs
5.0L (1979-1995) Mustang
3
09-14-2015 08:46 PM
jaiidutch
Motor Swap Section
2
09-14-2015 10:29 AM