i have a 93 mustang lx built 306 with digital 6 plus ignition box msd coil and a probillet distributor it started stalling like the power was going off and then back on and the light on the ignition box cut off and on with the power loss searched for bad wire or ground traced it to the spout connector if i remove it the car runs but no power because of the timing advance im assuming jumped from the ecm to the spout connector and still the same thing so wiring is good
i assume read it could be the the tfi module or the pip so changed them both still the same can someone please help ive been on this problem for about five days and im ready to light it on fire

 

have u tried removing the msd box to see if thats the problem

 

no it doesnt need the box what wires do i hook to the box

 

i mean what wires go to the coil i just unhook the box
didnt know it could run without the box

 

disconnected the msd box still cutting out and dieing with spout connected

 

any other suggestions this is driving me up the walls