I'm doing the swap
#1
I'm doing the swap
I have a 95 v6 and a 91 gt with frame damage. There is a fresh 5.0 in the fox and a brand new t5 behind it. I'm wanting to take the drive line out of the fox and put it into the 95 but I need to know if the accessories on the engine (alternator, a/c, power steering) need to be set up like the sn95's or can I just run it with the fox setup?
I already have gt suspension, 8.8, engine/ transmission, sn95 gt catback, and a T4M0 on the way.
I already have gt suspension, 8.8, engine/ transmission, sn95 gt catback, and a T4M0 on the way.
Last edited by speakerman86; 12-27-2012 at 05:00 AM.
#2
That's wierd that noone has answered yet, but I'm sure all of your belt driven accessories will be the same in the sn95. Except I think the fox has a clutch fan if I'm not mistaken.
Posted from MustangForums.com App for Android
Posted from MustangForums.com App for Android
#3
Well thanks for answering. I would imagine that people are tired of seeing engine swap threads. I am just concerned of where the belt driven accessories would be mounted if there would be issues with radiator hoses or power steering line clearance issues. I'm going to be running an electric fan so the fan clutch wouldn't be an issue
I ordered my T4M0 so that's one more thing off my list.
I ordered my T4M0 so that's one more thing off my list.
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM