Quick GT40 + Cam Question 94GT
#1
Quick GT40 + Cam Question 94GT
Hi guys, I'm looking to put GT40 heads on my 94 GT from an explorer. I'd also like to put in a cam that I can use with these heads. I'd like to get a trick flow cam but don't want to get too much lift. What it the max lift I can put in the car with these heads without worry about getting close on interference? Thanks for the input guys!
#2
Hi guys, I'm looking to put GT40 heads on my 94 GT from an explorer. I'd also like to put in a cam that I can use with these heads. I'd like to get a trick flow cam but don't want to get too much lift. What it the max lift I can put in the car with these heads without worry about getting close on interference? Thanks for the input guys!
#3
.
those heads have large combustion chambers so your compression will be less than optimum for 91 octane gas . . i would mill them .034" from stock or to 58 cc's [which ever comes first] to get it back up some.
i also wouldn't run anything bigger than a stage 1 with those unless you do some serious porting.
.
those heads have large combustion chambers so your compression will be less than optimum for 91 octane gas . . i would mill them .034" from stock or to 58 cc's [which ever comes first] to get it back up some.
i also wouldn't run anything bigger than a stage 1 with those unless you do some serious porting.
.
Last edited by barnett468; 11-01-2014 at 05:54 PM.
#4
Thanks guys for the advice! I think you just talked me out of purchasing the cam until I replace the current motor. lol
So I should be pulling the GT40 heads this coming weekend, anything else I should pull while i'm at it? I'm under the impression I should get the explorer intake while I'm tearing everything apart but perhaps there are other parts that would be worth grabbing?
So I should be pulling the GT40 heads this coming weekend, anything else I should pull while i'm at it? I'm under the impression I should get the explorer intake while I'm tearing everything apart but perhaps there are other parts that would be worth grabbing?
#5
Thanks guys for the advice! I think you just talked me out of purchasing the cam until I replace the current motor. lol
So I should be pulling the GT40 heads this coming weekend, anything else I should pull while i'm at it? I'm under the impression I should get the explorer intake while I'm tearing everything apart but perhaps there are other parts that would be worth grabbing?
So I should be pulling the GT40 heads this coming weekend, anything else I should pull while i'm at it? I'm under the impression I should get the explorer intake while I'm tearing everything apart but perhaps there are other parts that would be worth grabbing?
http://www.ebay.com/itm/Professional-Products-Throttle-Body-Adapter-Aluminum-Satin-Ford-1994-95-Mustang-/390958982727?pt=Motors_Car_Truck_Parts_Accessories&fits=Year%3A1994%7CModel%3AMustang&hash=item5b06f8a647&vxp=mtr
Thread
Thread Starter
Forum
Replies
Last Post